Rear Lifter Bin Services for Tight-Access Sites
Scheduled rear lift MGB bin collection for sites with limited space, laneway access or lower waste volumes — general waste, recycling, FOGO and cardboard, in mobile 120L–1100L wheelie bins. Flexible, compact, and priced transparently.
Wheelie bins loaded and emptied via rear-mounted compactor
What Is a Rear Lifter Bin Service?
A rear lifter bin service is a commercial waste collection system that uses lightweight, wheeled mobile garbage bins (MGBs) — typically 120L, 240L, 360L, 660L or 1,100L — which are wheeled to a rear-loading compactor truck and tipped from the back of the vehicle. Because the bins are mobile and the truck doesn't need to lift them overhead, rear lift service is the preferred option for sites with restricted access, low overhead clearance, laneways, basements, strata car parks, or simply lower waste volumes than a front lifter bin would justify.
Clean Waste designs and manages rear lifter bin services for general waste, co-mingled recycling, FOGO organics, and cardboard — under one account, one invoice, and one point of contact, with a free site assessment before your first collection.
Rear Lifter Bins, Built for Restricted Sites
Every rear lifter service is assessed for access, sized for actual volume, and documented — not just dropped and forgotten.
Built for Tight Access
No overhead lift arc required — ideal for laneways, basements, strata car parks and sites a front lifter truck can't service.
Right-Sized From Day One
Free site assessment confirms the correct bin size and frequency for your actual waste volume — no overflow, no wasted spend.
One Provider, One Invoice
General waste, recycling, FOGO and cardboard rear lift bins consolidated under a single account and monthly invoice.
Fully Licensed & Documented
EPA-licensed operations with consignment notes, waste tracking reports and disposal certificates issued for every job.
From Enquiry to Collection in 5 Steps
Here's exactly what happens when you set up a rear lifter bin service with Clean Waste.
Request a Quote
Tell us your waste types, volumes and site details, including any access constraints.
Free Site Assessment
We check laneway width, bin storage area and collection-day access — no obligation.
Right-Sized Waste Plan
We recommend MGB sizes, streams and collection frequency matched to your output.
Bin Delivery
Rear lift bins are delivered with lockable lids and castors ready for your first collection.
Ongoing Collection
Collections run on schedule with full documentation, and support on call for changes.
Rear Lifter (MGB) Bin Sizes
Mobile garbage bins range from 120L to 1,100L. The right size depends on weekly volume, storage space and collection frequency.
The smallest rear lift bin — suited to very low-volume sites or internal waste collection points.
Best for: small offices, kiosksThe most common rear lift size for small businesses with regular, modest waste output.
Best for: cafés, boutique retail, clinicsExtra capacity for slightly higher-volume generators without moving up to a 4-wheel bin.
Best for: restaurants, small strata sitesA popular mid-to-high volume rear lift option for busy hospitality and multi-tenant sites.
Best for: hotels, apartment complexesThe largest standard rear lift bin — for high-volume sites that still can't accommodate a front lifter bin.
Best for: large hospitality, tight-access retailAlso available for recycling (yellow lid), FOGO (green lid), cardboard and co-mingled streams.
Best for: separated waste streamsWaste Streams Available via Rear Lifter Bin
Run one stream or several — general waste, recycling, FOGO and cardboard can all be serviced under a single account.
| Waste Stream | Bin Lid Colour | Common Sizes | Accepted Materials |
|---|---|---|---|
| General Waste | Red lid | 120L – 1,100L | Non-recyclable, non-hazardous commercial waste |
| Co-mingled Recycling | Yellow lid | 120L – 660L | Glass, cans, rigid plastics, cartons, paper |
| Cardboard / Paper | Blue lid | 240L – 660L | Cardboard, paper, uncoated packaging |
| FOGO / Organic Waste | Green lid | 120L – 240L | Food scraps, food-soiled paper, garden organics |
What Can & Can't Go in a General Waste Rear Lifter Bin
Correct stream use avoids rejected collections and keeps you compliant with NSW EPA requirements.
✅ Accepted
- Non-recyclable commercial waste & packaging
- Food waste (where no FOGO service is in place)
- Broken crockery and non-recyclable ceramics
- Contaminated / food-soiled packaging
- Small mixed office waste (non-recyclable)
- Non-hazardous commercial cleaning waste
❌ Not Accepted
- Hazardous chemicals, solvents, industrial fluids
- Asbestos-containing materials — ever
- Liquid waste, grease trap waste, used oil
- E-waste — computers, batteries, electronics
- Clinical or medical waste
- Gas cylinders, pressurised aerosol cans, tyres
Site Access Requirements
Rear lift collection is the go-to option when a site can't meet front lifter access requirements. We check the following during your free site assessment.
- Bin storage area: A flat, sheltered space to store bins between collections
- Wheeling path: Clear, reasonably level path from storage area to the collection point (kerb, laneway or loading dock)
- Collection point width: Around 3 metres clearance for the truck to park and operate the rear compactor
- No overhead lift arc needed: Ideal for basements, awnings, verandas and covered loading docks
- Kerbside or laneway access: Well suited to CBD strata buildings and narrow side streets
Rear Lifter vs. Front Lifter Bins
Both systems run on the same waste streams and documentation standard — the right choice comes down to site access and volume.
| Factor | Rear Lifter Bin | Front Lifter Bin |
|---|---|---|
| Bin size range | 120L – 1,100L | 1.1m³ – 4.5m³ |
| Overhead clearance | Not required | ~7–8 metres for the lift arc |
| Best site type | Laneways, basements, strata, tight retail | Open hardstand with truck turning circle |
| Best waste volume | Low to moderate | Moderate to high |
| Bin mobility | Wheeled, can be relocated on-site | Fixed position, moved by truck forks only |
Still not sure? Our free site assessment will confirm which system suits your site — and we can run both side by side if your business needs it.
What Drives Your Rear Lifter Bin Cost
Clear quotes, no hidden fees — every cost component itemised so you can compare fairly.
Typical per-lift cost for a 240L general waste bin in Greater Sydney.
Typical per-lift cost for a 660L–1,100L general waste bin in Sydney.
Typical total waste cost saving achievable by adding recycling and FOGO stream separation.
Pricing depends on bin size, frequency, location and access. Request a free, itemised quote and we'll confirm your exact service cost after a no-obligation site assessment.
Rear Lifter Bins for Space-Constrained Sites
Every industry generates different waste streams — service plans are built around your specific site and operations.
Rear Lifter Bin Service Across Greater Sydney
From CBD laneways to suburban strips — consistent, on-schedule collection wherever your site is located.
Rear Lifter Bin Service FAQs
Straight answers to the questions Sydney businesses ask most before signing up.
What is a rear lifter bin service and how does it work?
A rear lifter bin service uses lightweight, wheeled mobile garbage bins (MGBs) that are rolled to a rear-loading compactor truck on collection day. The driver tips the bin into the rear hopper, which compacts the waste, then returns the empty bin. It's the standard option for sites that can't accommodate a front lifter truck's overhead lift arc.
What bin sizes are available for rear lift service?
Standard rear lift MGBs range from 120L to 1,100L, with 120L, 240L, 360L, 660L and 1,100L the most common commercial sizes. The right size depends on your weekly waste volume, storage space and collection frequency — confirmed during a free site assessment.
How is rear lift different from front lift bin service?
Rear lift bins are smaller, mobile, and wheeled to the truck for collection, with no overhead clearance required — making them ideal for laneways, basements and strata sites. Front lift bins are larger (1.1m³–4.5m³), stay fixed in position, and are lifted overhead by the truck's forks, which needs more overhead and turning space.
What site access does rear lift collection need?
Rear lift collection needs a clear, reasonably level path from your bin storage area to the collection point, plus around 3 metres of clearance for the truck to park and operate the rear compactor. No overhead lift arc is required, which is why it suits basements, covered loading docks and narrow laneways.
Can I run recycling and FOGO bins alongside general waste?
Yes. Rear lift bins are available for general waste (red lid), co-mingled recycling (yellow lid), cardboard (blue lid) and FOGO organics (green lid). Many Sydney businesses run two or three smaller bins together under one account and one consolidated invoice.
How much does rear lifter bin service cost in Sydney?
Per-lift costs for a 240L general waste bin typically range from $25–$45 in Greater Sydney, with 660L–1,100L bins ranging from $45–$85. Businesses that separate recycling and FOGO from general waste typically reduce total waste costs by 15–30% through reduced landfill levy exposure. Contact us for a free, itemised quote.
Set Up Your Rear Lifter Bin Service Today
Free site assessment. Right-sized MGB bins. All waste streams. Sydney-wide coverage. Consolidated billing.